The Brother printer is silent excellent printouts. It has high-quality laser printing. The ink has a three-dimensional impact on the colored printouts which has made it to be the unique one worldwide. It is highly recommended to run the wireless setup on a computer with a wireless connection to the network for Brother Printers. Numerous access points and routers are having primary and guest networks. Brother labeled printers need to have a successful setup on the primary network; these are not compatible with any of the guest networks.  Generally, users prefer to have a wireless connection for the Printers setup and installation and the same may apply if you choose to buy Brother Printer. Let us discuss the steps to be followed for Brother Printer Setup and Installation on your system.

 

Steps for Brother Printer installation and setup for wireless connection

 

1)     First of all you should download and run the Software / Document Installer from install. brother official link for the download.

 

2)     then activate the label printer.

 

3)     then connect the USB cable to the label printer and computer.

 

4)     There is a USB cable that is included with the label printer.

 

5)     Once the software installation starts on the PC then click on the Auto Select.

 

6)     If you get a message that an appropriate printer can’t be found: check the label printer is turned on, try reconnecting the USB cable, restart the pc, and check out connecting the cable to a different USB port on your computer.

 

7)     Confirm the right Printer and Language is chosen and click on OK.

 

8)     Enter your Name and name (if applicable).

​

9)     The Software and Manuals are going to be automatically check marked for install: Printer Driver, P-touch Editor, etc. The Printer Driver has to be selected to set up the label printer wirelessly on the network. Click OK.

 

10)   If prompted to enter the serial number, type the serial number located on the rock bottom of the label printer and click on Submit.

 

11)   If you comply with the terms of the End-User License Agreement, click Agree.

 

12)   The software and manuals are going to be downloaded and installed.

 

13)   Choose Wireless Network Connection and click on Next.

 

14)   Counting on how your computer is connected to the network, one among these windows will appear.

 

15)   If asked if a USB cable is going to be used for setup, attend step 14.

 

16)   If your wireless network settings are detected, attend step 22.

 

17)   Choose Yes (recommended) then click Next.

 

18)   Check the Checked and confirmed box then click Next.

 

19)   If prompted to temporarily connect your computer to the label printer employing a USB cable, disconnect then reconnect the USB cable from the rear of the label printer to continue the installation.

 

20)   The list of obtainable wireless networks is displayed, choose your network name then click Next.

​

21)   If your wireless network isn't listed, make sure the router is turned on, broadcasting the network name, which it's within range for wireless communication. you'll get to cycle the facility to the router for about 15 seconds to reestablish communication then click Refresh.

​

22)   Enter the Network Key then click Next.

 

23). At the Wireless Network Settings Confirmation window, you should then click Next. The settings are going to be sent to the label printer.

 

24)   For Advanced Users: If you would like to manually enter the IP address settings on your machine, click Change IP Address and enter the required IP address settings for your network.

 

25)   If the connection failed then cycle the facility on the router for about 15 seconds then retry the wireless setup again. If this configuration consistently fails, we recommend that you simply manually configure the wireless settings on your machine.

26)   When prompted, disconnect the USB cable from your label printer and computer to continue.

 

27)   Click Next to continue with the installation. attend step 24.

 

28)   Check your SSID (Network Name) is listed. Choose Yes, I would like to attach the machine to the present wireless network then click Next.

 

29)   When the Enable the Wireless Connection window appears, hold down the Wi-Fi button on the label printer until the LED starts flashing.

 

30)   Choose your label printer from the list, then click Next.

 

31)   If you do not see your label printer within the list, confirm that it's powered on, the pc is connected to an equivalent network as your label printer, then click Refresh.

 

32)   If the label printer remains ex-directory, you'll get to cycle the facility to the router for about 15 seconds to reestablish communication. Once the router restarts, wait a few minutes, then click Refresh.

 

33)   Click Finish.

 

34)   Click okay to display the web registration page or click Cancel to continue without displaying the page.

 

35)   If you clicked Cancel to continue without registration, it's going to take a couple of minutes for the installation window to continue.

 

36)   Click Finish.

 

37)   Disconnect the USB cable from your label printer and computer if you've got not already.

 

Hope these steps will help you successfully launch and install Brother Printer Setup and Installation with proper and workable setup on your device wirelessly.